Advanced Settings (LAN)

Configure the settings of the DNS server and enable/disable the local network.

Setup is performed from the printer settings screen (Web Configuration).

Setting DNS

Disabling local network

Setting DNS

1. Open the printer settings screen

　　　　

2. Change the printer DNS settings

  • From the menu or the menu button at the upper left of the screen, open [System Configuration] , enter the IP address of the specified DNS server and tap [Submit] .

Note

The printer default settings are the following.

DNS1 (primary DNS server)8.8.8.8
DNS2 (secondary DNS server)8.8.4.4


  • A screen where you can check and save the entered details will appear.


3. Save the settings to the printer

  • From the menu or menu button in the upper left, open "Save" , select "Save""Configuration Printing""Restart device", and tap "Execute".
    The settings are saved to the printer and printed out.

 Top

Disabling local network

1. Open the printer settings screen

　　　　

2. Disable the local network setting of the printer

  • From the menu or the menu button on the upper left of the screen, open [System Configuration], change the settings of TCP#9100/9101, UDP#22222 to “DISABLE”, and then tap [Submit].
  • A screen where you can check and save the entered details will appear.


3. Save the settings to the printer

  • From the menu or menu button in the upper left, open "Save" , select "Save""Configuration Printing""Restart device", and tap "Execute".
    The settings are saved to the printer and printed out.

 Top