Installation Notes

This section contains safety information for preventing harm to users of this product, to third persons, and damage to property.
Carefully read before using this product and use the product properly.

We are not liable for any damage that occurs as a result of incorrect use other than those detailed in the safety information or in the manual for this product, or for any damage that occurs due to repairs/changes made by a third party who is not part of our company or specified by our company.

Warning

Do not install in the following locations

Doing so may cause electric shock or fire.

  1. Locations where there is a danger of electricity or water leakages.
  2. Locations that are in the vicinity of fire, that are subject to direct sunlight, or where heat may be trapped.

Caution

Do not install in the following locations

Installation in the following locations may cause malfunction.

  1. Locations where there is static electricity or where a strong magnetic field is generated.
  2. Locations where ventilation is poor or there is much dust.
  3. This product uses DC motors and switches which require contact with electricity; therefore avoid using in locations where silicone gas or flammable gas is volatilized.
  4. Locations where temperature and humidity exceed the usage environment conditions, or where condensation occurs.
  5. Locations where the floor is not flat, or where vibrations occur.
    Failures such as paper feeding error may occur.
  6. Do not use the same electrical outlet as the one where equipment that generates noise such as copiers and refrigerators are connected to.
  7. Location at a distance from an electrical outlet.
    Install in a location that is near the electrical outlet so that the power plug can be immediately pulled out if an abnormality occurs.
  8. This device is not suitable for use in the vicinity of children.

Installation of accessories and optional products

  1. When installing accessories and optional products, turn the power of this product off, and pull the power plug out of the electrical outlet. Carefully read the installation steps in the manual and install correctly.