Turn power on
Confirm that the power cable is connected properly before turning on the power.
Connect Power Cable1. Turn power on
- Press the power switch on the side of mPOP.
![](../../illust/3_powerOn1.png)
2. Confirm LED lamp
- When the power is turned on and it can be used normally, the Power LED turns on blue.
![](../../illust/3_powerOn2.png)
In the POP10CBI, the PowerLED will be displayed in green when Bluetooth is not connected.
For details, refer to LED Display.
Turn power off
1. Turn power off
- Press the power switch on the side of mPOP.
![](../../illust/3_powerOff1.png)
2. Confirm LED lamp
- The blue Power LED turns off when the power is turned off.
- Confirm that the LED lamp has turned off before turning the power on again.
![](../../illust/3_powerOff2.png)