Connect with USB

Connect a USB cable so that this product can communicate with a PC or tablet via USB.
If you connect a device only to supply power to this product, refer to Turn ON/Off Power.
If you use macOS or Linux, install the corresponding driver. Install Driver

Memo

USB communication supports Android, Windows, macOS, and Linux.

1. Prepare a USB cable

The USB cable used for connection varies depending on the operating system of your device.
Prepare an appropriate cable according to your device.

If you use a commercially available cable, be sure to fully verify its operation before beginning actual use.

Users of Android
USB cable (C-C)
Users of Windows, macOS, and or Linux
USB cable (C-A) or   
USB cable (C-C)



USB cable (C-C)

Product-side plugUSB-C
Device-side plugUSB-C
  • Prepare a cable that conforms to the USB2.0 standard, and is no longer than 3 m.

Next step

USB cable (C-A)

Product-side plugUSB-C
Device-side plugUSB-A
  • Prepare the USB cable that was provided with the product or that conforms to the USB2.0 standard, and is no longer than 3 m.

Next step

2. Connect the USB cable to the product

  • Connect the USB cable to the USB-C port of the product.

3. Connect the USB cable to the PC or tablet.

  • Connect the other plug to the PC or tablet.

 Top