Advanced Settings (LAN)

Printer firmware version 3.3 or later supports the DNS server specification.
Also, printer firmware version 3.6 or later supports the enable/disable settings of Telnet and the local network.

Setup is performed from the printer settings screen (Web Configuration).

Setting DNS

Enabling Telnet

Disabling Local Network

Setting DNS

1. Open the printer settings screen

2. Change DNS settings of printer

  • From the menu or the menu button displayed at upper left, open [System Configuration] and input specified DNS Server’s IP address , and tap [Submit] .

Note

Default settings of printer are as follows:

DNS1 (Primary DNS Server)8.8.8.8
DNS2 (Secondary DNS Server)8.8.4.4


  • A screen where you can check and save the entered details will appear.

3. Save settings to printer

  • From the menu or the menu button in the upper left, open [Save] , select SaveRestart device , and tap [Execute] .
    The settings are saved to the printer.

Enabling Telnet

1. Open the printer settings screen

    

2. Enable the Telnet setting of the printer

  • From the menu or the menu button on the upper left of the screen, open [System Configuration], change the Telnet setting to ’ENABLE’, and then tap [Submit].

Note

The initial settings of the printer differ depending on the printer firmware version (F/W Ver.).

F/W Ver. 3.5 or earilerTelnet: Enable (Fixed to Enable)
F/W Ver. 3.6 or laterTelnet: Disable


  • A screen where you can check and save the entered details will appear.


3. Save settings to printer

  • From the menu or the menu button in the upper left, open [Save], select SaveRestart device, and tap [Execute].
    The settings are saved to the printer.

Disabling Local Network

1. Open the printer settings screen

    

2. Disable the local network setting of the printer

  • From the menu or the menu button on the upper left of the screen, open [System Configuration], change the settings of TCP#9100/9101, UDP#22222, and LPR port to ’DISABLE’, and then tap [Submit].
  • A screen where you can check and save the entered details will appear.


3. Save settings to printer

  • From the menu or the menu button in the upper left, open [Save], select SaveRestart device, and tap [Execute].
    The settings are saved to the printer.