Advanced Settings (LAN)
It is convenient to use the dedicated app when setting a connection with a smartphone or tablet.
For details, refer to Use App.
If you do not use a dedicated app, setup is performed from the printer settings screen (Web Configuration).
Setting DNS
Enabling Telnet
Disabling Local Network
Setting DNS
1. Open the printer settings screen
- Connect the printer to the same network as the host device that will be used for setup. Connect LAN Cable
- Check the printer IP address. Check Printer IP Address
- Open the printer settings screen (Web Configuration) via a web browser such as Google Chrome or Safari. Open Printer Settings Screen
2. Change DNS settings of printer
- From the menu or the menu button
displayed at upper left, open [System Configuration]
and input specified DNS Server’s IP address 
, and tap [Submit] 
.
Note
Default settings of printer are as follows:
| DNS1 (Primary DNS Server) | 8.8.8.8 |
|---|---|
| DNS2 (Secondary DNS Server) | 8.8.4.4 |
- A screen where you can check and save the entered details will appear.
3. Save settings to printer
- From the menu or the menu button in the upper left, open [Save]
, select Save Configuration printing Restart device 
, and tap [Execute] 
.
The settings are saved to the printer.
Enabling Telnet
1. Open the printer settings screen
- Connect the printer to the same network as the host device that will be used for setup. Connect LAN Cable
- Check the printer IP address. Check Printer IP Address
- Open the printer settings screen (Web Configuration) via a web browser such as Google Chrome or Safari. Open Printer Settings Screen
2. Enable the Telnet setting of the printer
- From the menu or the menu button on the upper left of the screen, open [System Configuration],
change the Telnet setting to ’ENABLE’, and then tap [Submit].
- A screen where you can check and save the entered details will appear.
3. Save settings to printer
- From the menu or the menu button in the upper left, open [Save], select Save Configuration printing Restart device , and tap [Execute].
The settings are saved to the printer.
Disabling Local Network
1. Open the printer settings screen
- Connect the printer to the same network as the host device that will be used for setup. Connect LAN Cable
- Check the printer IP address. Check Printer IP Address
- Open the printer settings screen (Web Configuration) via a web browser such as Google Chrome or Safari. Open Printer Settings Screen
2. Disable the local network setting of the printer
- From the menu or the menu button on the upper left of the screen, open [System Configuration],
change the settings of TCP#9100/9101, UDP#22222, LPR port to ’DISABLE’, and then tap [Submit].
- A screen where you can check and save the entered details will appear.
3. Save settings to printer
- From the menu or the menu button in the upper left, open [Save], select Save Configuration printing Restart device , and tap [Execute].
The settings are saved to the printer.