Check Model

There are multiple mC-Print3 models with different supported interfaces. You can check the model name of your printer using the following methods.

Check via the label on the back of the printer

You can confirm the model name of your printer in the place shown below.

In red frameModel name + Color identification / destination


If you are using MCP31CI or MCP31CBI, refer to mC-Print3 Online Manual (2nd Generation).

mC-Print3 Online Manual (2nd Generation)



Check via Self-Printing

The model name is shown at the beginning of printer information printed using the Self-Printing function.

The model name is shown in the top field that begins with "Mode:".
Self-Printing

Note

For test printing, “MCP31LB” is displayed for MCP31LBNH and “MCP31L” is displayed for MCP31LNH. Check this together with the interface sticker on the back of the printer to identify the model.

Also set “MCP31LB” for MCP31LBNH and “MCP31L” for MCP31LNH in the dedicated application software.

Table of supported interfaces

The below table shows interfaces each model supports.

Interface Bluetooth® Ethernet
(LAN)
USB-A 2.4A
(Lightning USB)
USB-C® 18W
(USB PD)
USB-A 0.5A
(2 ports)
USB-B
MCP31L--
MCP31LNH---
MCP31LB-
MCP31LBNH--
MCP30----
MCP31C---
MCP31CB--

Note

The supported OS for each interface and communication vary depending on the model. For details, refer to the connection explanation for each interface.

Bluetooth Ethernet USB-A 2.4A USB-C USB-B

Interface sticker on the back of the printer