Self-Printing

You can check basic information and settings of BSC10II with the self-printing function.

As printing is conducted regardless of whether or not the printer is connected to a PC, tablet, or smartphone, the stand-alone operational status of the printer can be confirmed.

Make sure to set up the paper before performing self-printing.

Paper Setup

1. Turn the power on

  • Press the power switch on the back of the main unit.

2. Open the printer cover

  • Hook your fingers into the cover open groove on both sides of the printer cover , and open the printer cover .

3. Perform self-printing

  • Press the [FEED] button until the POWER LED begins flashing blue , and then release it.

  • When the cover is closed, the printer is reset and self-printing is performed.

  • When self-printing is completed, the printer is reset and the LED returns to status display. Remove the printed paper.