SM-T400i Series
Apple MFi certified, Splash Resistant and Dust Protected Features, Android and iOS Printer
- Dust Protected and Splash Resistant Features
- All-in-one Package
- Long Battery Life
- Click here for information on handling lithium battery packs
Features
Dust Protected and Splash Resistant Features
Certified by the IP54 international standard
All-in-one Package
Ships with Battery Charger, Belt Clip, Battery pack, Serial Cable and Sample Paper Roll
Long Battery Life
Operation time is a maximum 35 hours (5 minute printing intervals and energy saving mode) with one full-charge (Firmware Ver. 4.0 or more))
If you would like to see information other than the above features, please refer to the “Others” section.
Dimensions（mm）
[Without MSR]
Specifications
| Model Name | SM-T400I2-DB2 | ||
|---|---|---|---|
| Printer Case Color | Gray | ||
| Printer Method | Direct Thermal Line Printing | ||
| Character Specifications: | Character Matrix | 12 x 24 dots, 9 x 24 dots, 9 x 17 dots | |
| No. of Columns | Up to 69 columns | ||
| Character Sizes | 1.5 x 3.0 mm (W x H) (12 x 24 Font) | ||
| Print Resolution | 8 dot/mm (203 dpi) | ||
| Emulation | ESC/POS™, StarPRNT | ||
| Interface versions | RS232C & Bluetooth® (Ver. 5.2) | ||
| Print Speed | Up to 110 mm/second | ||
| Paper Specifications: | Media | Thermal Paper | |
| Width | 112 mm (4 inch) | ||
| Roll Diameter | 50 mm | ||
| Thickness | 0.060–0.070 mm | ||
| Overall Dimensions (W x H x D) | 151 x 136 x 63 mm | ||
| Weight | 735 g (including Battery) | ||
| Power Voltage | 7.2 V (2500 mAh) | ||
| Battery Running Time at 5 minute printing intervals | 30 hours (35 hours) | ||
| Print Width | 104 mm | ||
| LCD Display | FSTN 128 x 32 dot (Blue Backlighting) | ||
| Operating Conditions | -10–50°C, 30–80%RH | ||
| Print Head Life | Thermal Paper | 50 km | |
| Thermal Label | 10 km | ||
| Drop Test | 1.5 m | ||
| Barcodes | JAN/EAN-8/13, UPC-A/E, NW-7, Interleaved 2/5(ITF), CODE39, CODE93, CODE128, GS1 Barcode (StarPRNT only) |
||
| 2D Code | QR Code, PDF417, Data Matrix (ESC/POS only) | ||
| GS1 2Dcode (StarPRNT only), GS1 composite (StarPRNT only) | |||
| Others | Dust/Splashproof (International Standard “IP54”) |
||
In accordance with the requirement of the EU commission
p36-084080_battery_charger_spec_en.pdf
Related Contents
For Corporate / Developers
Store Applications
Accessories/Options
Accessories
Battery pack
Battery Charger
Belt clip
Sample roll paper
Serial communication cable
The included accessories vary depending on the model.
Options
Shoulder Strap
4P Battery Charger
Car Charger
Battery Holder for Charging
Battery Charge Charger
Compatible software
Other
Apple MFi Certified
Certified by Apple Inc. for all iOS devices including: iPad, iPhone, iPod
OS supports iOS, Android
Easy Setup Facility – Switch from iOS support to other OSs. Simple front panel controls allow configuration of the printer and selection of either MFi mode or SPP for all other Operating Systems.
Blue Light LCD Display
Easy to determine printer status and error type.
Dual Interface
Bluetooth® 5.2 + Serial(RS-232C)
Security
Security mode 3 (max 16-digit PIN) supported
Compatible with Various OS Environments
StarXpand SDK facilitates developers in easily designing mobile applications without complicated communication control on diverse operating systems like iOS (iPhone, iPad, iPod) and Android.
StarwebPRNT Support
Enables printing from Web-based applications
(by using StarwebPRNT Browser)
(Note)
*All company and product names are trademarks or registered trademarks of their respective owners.
Trademarks