Supported Model:
TSP100IV TSP100IV SK TSP100IIIW TSP100IIILAN TSP100IIIBI TSP100IIIU TSP100IIU+ MCP31L MCP31LB MCP31CI MCP31CBI MCP31C MCP31CB MCP30 MCP21LB MCP20B MCP20 MCL32CI MCL32CBI POP10 POP10CI POP10CBI TSP650II TSP650IISK TSP700II TSP800II BSC10II BSC10 TSP043 SP700 TUP500 SK1-211/221/V211 SK1-311/321/V311 SM-S210i(StarPRNT) SM-S210i(ESC/POS) SM-S230i(StarPRNT) SM-S230i(ESC/POS) SM-T300(StarPRNT) SM-T300(ESC/POS) SM-T300i(StarPRNT) SM-T300i(ESC/POS) SM-T400i(StarPRNT) SM-T400i(ESC/POS) SM-L200 SM-L300
actionPrintBarcode(parameter: StarXpandCommand.Printer.BarcodeParameter)
Execute barcode printing
actionPrintBarcode(parameter: StarXpandCommand.Printer.BarcodeParameter): PrinterBuilder
Parameter |
||
---|---|---|
parameter |
Barcode setting parameters |
Return value |
|
---|---|
This object |
Note
A line break is automatically added after the barcode is printed.
If a barcode that does not fit in the printing area is specified, the printing data for the barcode is not generated. (Except for TSP100II and TSP100III series)
To specify a control code lower than 0x1F in contents, specify the coding as
\\x[0-9A-Fa-f]{1,2}
. (Example: For 0x00, specify\\x00
)barRatioLevel is valid for Code39, NW7, and Itf.
To specify a control code such as FNC1 for Code128, specify the coding as
\\(control code)
. (Example: For FNC1, specify\\(FNC1)
) Control codes such as start codes or code conversions are unnecessary because they are specified automatically.