Installation Notes

This section contains safety information for preventing harm to users of this product, to third persons, and damage to property.
Carefully read before using this product and use the product properly.

We are not liable for any damages incurred by improper use other than those detailed in the safety information or in the manual for this product, or damages incurred due to repairs/changes made by a third party who is not of our company or specified by our company.

Warning

Do not install in the following locations

It may cause electric shock or fire.

  1. Where there is a danger of electrical leakage and water leakage.
  2. Locations that are in the vicinity of fire, where subject to direct sunlight, or where heat may be trapped.

Caution

Do not install in the following locations

Installation in the following locations may cause malfunction.

  1. Locations where there is static electricity or where a strong magnetic field is generated.
  2. Where ventilation is poor or dusty.
  3. This product uses DC motors and switches which require contact with electricity; therefore avoid using in locations where silicone gas or flammable gas is volatilized.
  4. Locations where temperature and humidity exceeds usage environment, or where condensation takes place.
  5. Locations where it is not flat, or where vibrations occur.
    Installation where it can topple over or fall may cause injury or malfunction.
  6. Do not use the same electrical outlet as the one where equipment that generates noise such as copiers and refrigerators are connected to.
  7. Location at a distance from an electrical outlet.
    Install in a location that is near the electrical outlet so that the power plug can be immediately pulled out if an abnormality occurs.
  8. This device is not suitable for use in the vicinity of children.

To install accessories and optional products

  1. When installing accessories and optional products, turn the power off of this product, and pull the power plug out from the electrical outlet. Carefully read the installation steps in the manual and install correctly.
  2. Wall mounting bracket (accessory):
    We will not be responsible for accidental damage due to inadequate mounting, misuse, modifications and such. Confirm the following items, and install in a safe and correct manner.
    3. - For screws attached to the wall and to mount to the wall, the user must always design/set up appropriately, or ask a professional. When attaching to a high place, please be cautious and ensure that it is securely fixed to the wall.
    If it is not attached securely, it may cause damage or injuries if it falls.
    - Depending on the condition of the mounting surface or the screws used for mounting, sufficient mounting strength may not be attained. In order to prevent the product from falling due to the weight of the printer and cables, please ensure that it is securely and properly mounted.
    It may cause damage or injuries if it falls.
    - Do not install where there are numerous vibrations and shocks, or in an unstable location.
    It may cause damage or injuries if it falls.
  3. Drip-proof cover (option): The drip-proof cover cannot be used in a vertical position.
 Top