Introduction

Requirements

Platform	Interface
iOS	LAN Bluetooth Bluetooth Low Energy USB
Android	LAN Bluetooth USB
Windows	LAN Bluetooth

Model	Interface	Firmware version	react-native-star-io10 version
TSP650II	LAN Bluetooth USB(Android)	4.0+	1.0+
TSP650IISK	LAN Bluetooth USB(Android)	1.0+	1.0+
TSP700II	LAN Bluetooth USB(Android)	7.1+	1.0+
TSP800II	LAN Bluetooth USB(Android)	2.0+	1.0+
TSP100IIU+	USB(Android)	1.0+	1.1+
TSP100IIIW	LAN	1.0+	1.0+
TSP100IIILAN	LAN	1.0+	1.0+
TSP100IIIBI	Bluetooth	1.0+	1.0+
TSP100IIIU	USB	1.0+	1.0+
TSP100IV	LAN USB(Android) [1]	1.0+	1.1+
POP10	Bluetooth USB(Android)	2.0+	1.0+
POP10CI	USB	4.0+	1.2+
MCP20	LAN USB(Android)	3.0+	1.0+
MCP20B	LAN Bluetooth USB(Android)	3.0+	1.0+
MCP21LB	LAN Bluetooth USB	3.0+	1.0+
MCP30	LAN USB(Android)	3.0+	1.0+
MCP31L	LAN USB	3.0+	1.0+
MCP31LB	LAN Bluetooth USB	3.0+	1.0+
MCP31C	LAN USB(Android)	3.0+	1.0+
MCP31CB	LAN Bluetooth USB(Android)	3.0+	1.0+
SM-S210i	Bluetooth	4.3+	1.0+
SM-S230i	Bluetooth USB(Android)	1.8+	1.0+
SM-T300	Bluetooth(Android/Windows)	4.3+	1.0+
SM-T300i	Bluetooth	4.3+	1.0+
SM-T400i	Bluetooth	4.3+	1.0+
SM-L200	Bluetooth(Android/Windows) Bluetooth Low Energy	3.1+	1.0+
SM-L300	Bluetooth(Android/Windows) Bluetooth Low Energy	2.2+	1.0+
BSC10	LAN USB(Android)	1.4+	1.0+
TSP043	LAN USB(Android)	1.4+	1.0+
SP700	LAN Bluetooth USB(Android)	4.0+	1.0+
TUP500	LAN USB(Android)	1.0+	1.0+
SK1-211/221/V211	USB(Android)	1.1+	1.0+
SK1-311/321/V311	USB(Android)	1.1+	1.0+

[1] Please use Android 9.0 or later when connecting via USB-A. Also, simultaneous connection of multiple devices is not supported.

Warning

When connecting BSC10 and TSP043 via USB, set the printer busy condition to “Receive buffer full”. (The factory default setting is “Receive buffer full, offline”) (Set bit 4 of memory switch 7 to 1)